Why does my invisible dog fence keep beeping?

My invisible dog fence control panel is beeping. Your Invisible Fence control panel may be beeping every other second. This is likely to indicate a wire cut somewhere on your property. So they can be caused by digging in the yard too deeply, burrowing animals, or even the weather.

Why is my pet safe beeping?

Your dog has left the yard when the transmitter box begins to beep. The transmitter box will continue to beep until there is a fix. The fence line is invisible, so it becomes more difficult to locate the break.

Why is my invisible dog fence box beeping?

Your invisible dog fence control panels constantly beep. There is likely a wire cut somewhere on your property. Your invisible dog fence control panels are beeping, but with a long pause between each sound, then it is possible that your backup battery needs to be replaced.

Also, why is the invisible dog fence beeping?

The transmitter box will begin to beep to notify you that your dog has left the yard. The transmitter box will continuously beep until the fence is repaired or replaced. So the invisible fence line makes it more difficult to locate the fence break.

You may also wonder, “What do you do if your dog runs over an invisible fence?”

  1. Verify that your boundary width is at the right distance.
  2. The collar can be used to test the batteries.
  3. To test the collar’s functionality when crossing the fence, you can check it by testing the fence.
  4. Turn the transmitter dial-up.
  5. If your collar is working, ensure that your dog is well-groomed so it can touch the skin.

How do I reset an invisible fence transmitter?

The system reset can be as easy as changing the batteries in the transmitter. Turn off the power to the fencing. Unplug the transmitter. Check for metal objects near or on the top fence.

Do you have to bury invisible dog fence wire?

The wire can be used to create an electric dog fence. So it doesn’t need to be buried from a functional perspective. If you do it right, so you can avoid the trip hazards and eyesore of burying the wire. Non-buried fence wire is just as durable as buried wire.

Why is my electric dog fence not working?

Replace The Battery:

Some invisible pet fences come with a battery tester. If you don’t own one, you can replace the battery and take the collar to the boundary. If there is an issue with the battery, the collar will work when you reach the hidden boundary wire.

Pet Safe Radio-125 Transmitter Repair:

  1. Make sure the fuse at the back of your device isn’t blown. If it is, replace it.
  2. Perform the short loop test to confirm that your transmitter is working properly.
  3. Disconnect the A.C. adapter from your transmitter and the ground wires.
  4. Check for any damaged components.

How do I find out the frequency of my invisible fence?

Remove the transmitter’s lid to find the SW1 switch on your circuit board. You can set it in either the up or down position (10K).

How do you remove an invisible fence transmitter?

How to disconnect an invisible fence:

  1. Take the invisible collar off your pet’s neck and switch it off at the side.
  2. Locate the radio transmitter. Disconnect the radio transmitter from the electrical outlet.
  3. To remove the invisible fence wiring, dig around the perimeter.

Why is my dog’s shock collar not working?

Although it sounds absurd, the most common issue is that users don’t turn the remote and collar on. Before doing anything, make sure you have both the collar and remote turned on. Modern shock collars have a lock mode that prevents you from accidentally applying a correction to your dog.


Your invisible dog fence control panel is constantly beeping. This indicates that there may be a shortage of your property. If your invisible dog fence control panel is constantly beeping with a long pause between each sound, it could be that your backup battery has to be replaced.

Some FAQs:

My invisible fence keeps beeping:

My invisible fence control panel is beeping. Your Invisible Fence control panels may be beeping every second. This could indicate that there’s a boundary wire breach on your property. These can be caused by digging too deep in your yard, burrowing animals, or the weather.

What is the reason my dog watch fence is beeping?

Dog Watch pet fences come with a transmitter to connect to the underground wire. The transmitter displays lights to indicate whether the Dog Watch fence works properly. If the transmitter turns green and the wire emits an audible sound, the boundary wire has failed.

How can you reset an invisible fence transmitter?

To reset the system is as simple as changing the transmitter’s batteries. Bring your dog inside, and turn off the power supply to the fence. Unplug your transmitter. Look for any metal objects near or on top of the fence.

How often does Invisible Fence use?

The invisible fence uses radiofrequency 10.8khz and 7.5khz, with a 30hz frequency modulation frequency. The broadcast area should be approximately 3 feet.

Leave a Comment