Portable Dog Fence for Camping: The Complete Guide

Feature Image - Portable Dog Fence For Camping

What’s more fun than camping? Camping with your furry companion! Your dog will enjoy the outdoors and hiking like you; however, what’s the best method to protect them during their time at camp? The answer is installing the portable dog fence that you can take with you.

What’s a Portable Dog Fence?

A dog fence that can use in portable camping is an area that encloses by fence panels. They are typically located next to an RV.

It lets your dog play and exercise without having to oversee it. It is possible to select RV models which are suitable for pets to travel in. However, your pet will not always be in the RV.

What is the Reason a Dog Fence at Camp Helpful?

In addition to other gear for camping with your dog, using a portable dog fence to camp offers many advantages and can help ensure that your trip is stress-free. As we said that it provides your dog with an area to play and get some exercise.

A dog fence for camping is also helpful as it protects them from wildlife or other dogs that might be in your campsite. Also, it decreases the likelihood of your dog running off and wandering around.

Another benefit to having a pet pen for camping is that you have a space to let your dog dry off after taking a bath or going swimming. The final thing you want is for the interior of the RV to smell like a wet animal!

What is the Best Dog Fence that Takes you on the go?

If you are looking to choose the most effective pop-up fence for your dog, There are some aspects to look for:

  • Size
  • Height
  • Material
  • weight
  • Shape


The pet fence you purchase for your campsite in the RV must be large enough for your pet to play around within.

Naturally, larger dogs require more space. Therefore picking a fence that can include more pet fence panels is crucial.

If you’re traveling with puppies according to your breed of dog, it may not require a fence at first. Remember, however, that they could grow out of it later. If you’re traveling with more than one pet, you’ll also require a giant dog fence for camping.


The height of your pet fence that you can put up is something to think about. The first thing to consider is that your kind of dog will determine the size you need.

But, you’ll have to consider the height of your dog while standing on its hind feet. If your dog is known to jump. It is essential to ensure that the dog pen fencing is sufficiently high to stop the dog from jumping out.


A majority of the pet fences in use today are constructed from steel or metal that is coated with some protection against corrosion.

It is essential to want your mobile pet fence to last weatherproof and durable for a long time. Walls are also made from molded plastic.


Camping with your pet is supposed to be enjoyable and relaxing, which is why the use of a dog fence for camping that’s light as well as easy to get is essential.

Naturally, you don’t want it to be so heavy that your dog will be able to fall over it and cause injury, but it shouldn’t be too difficult to carry around or pack up or tear down.


Most fences are rectangular or square-shaped. But, some can make to order and can be adjusted to form the form that works best for your camping site.

How Deep Should Wire Dug?

The wires that the collar system is buried in should be located near the lawn’s surface to transmit signals to the unit located effectively.

In most cases, wires must be placed in a trench approximately 1 to 3 inches in depth. The cables should be buried in this depth will allow for sufficient transmission of the signal while also protecting the wire from being damaged by lawnmowers and other equipment in the lawn.

What is the Fence’s Cross-Section? Sidewalks or Driveways?

If the wire has to cross the pavement surface, like a driveway or a sidewalk or driveway, it should be placed through the pavement or through a trench that is cut in the asphalt.

Cutting a track in the pavement is the more straightforward solution; a half-inch-deep groove cut with a masonry-blade-equipped circular saw is generally adequate to conceal the wire. Once the wire has been laid into the groove, it can be filled in with concrete sealant.

Invisible Dog Fence for Campaign

The invisible fence is an opportunity for dog owners to confine their pets to their yards without the requirement of an over-ground fence.

The invisible fence systems operate with the same concept of sending an unpleasant electronic signal to the collar worn by the dog when the dog attempts to venture outside the fence.

Installing an invisible fence requires preparation and planning. Before you begin the installation process, contact local utilities and ensure that all utility lines are in underground locations to ensure safety.

Explore through your home to determine where the fence wire invisible to you will situate, calculate the property’s area, and identify any areas that might be difficult.

Consider areas of landscaping and utility boxes, air conditioning units, and other structures you’ll have to consider when making the design for the fence. Also, consider the boundary or correction zone that surrounds the wire while designing.

6 Things You Should Keep in Mind:

  • Buy the quantity of wire that you’ll require according to your estimations. Use an 18-gauge wire or a thicker one should you be able to, since it will be stronger when placed underground.
  • Pick a place where the receiver is near an electrical source and most likely protected, like in garages. You can drill a hole of a smaller diameter if it is necessary inside an outside wall. The wire can run through a grommet made of rubber inside the hole to connect the transmitter. Unroll the wire at this point and follow it along the route which the wire follows throughout the yard.
  • The wire should install by putting the shovel’s point directly into the ground from 1 or 6 inches. Move the shovel backward to make a narrow slit through the soil. Put the wire into the slit, then step onto your feet to secure it. Continue moving around the yard this way to place the wire in the ground.
  • Begin to work back towards the transmitter until you can see the start and the end of the wire in the spot where the transmitter will place. Be aware that the system runs by loops and requires to use of both wire ends.
  • Attach the transmitter to the wall close to an electrical source. Connect the transmitter directly to the wall, or drill to create the pilot hole to attach a wall anchor, like the toggle bolt, if required.
  • Attach both wire ends to designated terminals on your transmitter. Make use of a screwdriver to secure the airport against the wire. Connect the cable of power for the device to an electrical source.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *