In this article, we will review the How to Set up Wireless Pet Contaminant System?. Along with their advantages and disadvantages, as well as frequently asked questions and training suggestions to assist you in making an informed choice about your pet’s safety.
What is a Pet Contaminant System?
Best wireless pet contaminant system allows you to set up a safe and secure 1/2-acre circle of a boundary within your yard without digging up wire or building an actual fence.
For setup, you put your Wireless Containment System receiver inside then adjust it to provide the ideal size that your dog will enjoy.
The portable system can be set up in just a couple of hours. So you can easily carry it along on your camping trips and much more.
This wireless fence includes a Pet Safe Wireless Pet Containment System Receiver Collar. The battery-powered receiver collar comes with the option of training using a tone-only feature and 5 levels of correction based on your dog’s temperament.
The collar is adjustable to accommodate neck sizes ranging from 6-28 inches and is suitable for pets weighing 5 pounds and above.
If you purchase more Pet Safe Wireless Fence receivers. The Wireless Containment System will contain an unlimited number of animals in a single unit.
How to Set up Best Wireless Pet Contaminant System?
A best wireless pet contaminant system includes two components The transmitter and the receiver. The transmitter is connected to an electrical outlet. It is attached to a pet’s wireless collar that houses the receiver.
The transmitter transmits an area of radio frequencies and can be adjusted to adjust the distance of the signal to suit your preferred boundary.
Removal & Installation of Transmitter
Take everything out of the box. Go through the instruction manual if you have one. Set up the transmitter in a spot that will allow the full range of your property.
Check that there’s no metal within two inches of the unit. It should be mounted on the wall when wall-mounted or set up higher. It would help if you were, at the minimum, 2-4 feet away from the ground.
Setting Boundary
Remove the collar and connect it to the charger. Wait for around 2 hours to receive an entire charge. Usually, the light will flash when it is ready. Click and hold down the power button for a few seconds until it begins blinking.
When setting up a boundary, be sure you’re aware of the specifications for distances of the transmitter. Most brands have two frequencies: high and low frequency, based on the length required.
If your house has an expansive backyard. You’ll need to adjust the setting generally located on the base of the transmitter.
The next step is to ensure you hire a person to assist you because it makes setting up simpler. One person is at the transmitter, while the other walks towards the boundary.
They wait for the sound of the boundary line, as well as for that static shock. With the boundary flags placed, you can mark along the boundary line. You should walk the entire house to know where it ends and where it begins.
To allow your pet to go outside and inside the house, ensuring an exit point at the property is the best option. Most models allow you to change the setting to narrow into the frequency and create most of the area you live in.
Adjusting The Shock Collar
Most collars come with an adjustable button that can determine the level of static shock they can give. Always start your pet with the lowest setting.
And If there is no response observed, Then an adjustment is required. When the shock becomes too intense for your pet.
It will be unable to reach the boundary and become highly anxious and upset. It isn’t a pleasant reaction, so be careful not to set the shock a too high alarm.
Training and Removal of Boundary Flags
Many models include a trainer guide, also accessible on YouTube for you to guide your pet to stay within the boundaries. It is important to note that it will require some dedication and knowledge to train correctly.
Once you have completed the training, gradually take down the boundary flags and allow the pet to enter progressively the boundary that is not marked.
Teaching your pet to respect the boundaries is about faith and consistency with the dog’s trainer. It has been demonstrated that a mix of shocks to the limit that encourages, rewards, and reinforces is the most effective way to create lasting changes in behavior.
Follow the instructions from the company that you are using to set up your device because they can differ.
Areas with steep declines or slopes may have more difficulty receiving signals; therefore, test the device first.
How does a Wireless Pet Containment System Work?
A dog containment system wireless comprises two components: the transmitter and the receiver.
The transmitter plugs into an electric outlet, and the wireless dog collar is equipped with a receiver.
The transmitter transmits an area of radio frequencies to alter the signal’s distance to the preferred boundary. If your dog wanders beyond the limit you’ve defined, it’ll get the electric shock.
The static surprise isn’t unpleasant or painful – it’s like the sensation of splashing cold water on the face. Certain receivers can emit noises when they cross the specified boundary.
However, shock collars may cause minor discomfort to the skin. It is recommended that the Humane Society encourages owners to keep their dogs’ necks clean and contact points frequently and avoid leaving the collar in place during extended periods. What is the most effective collar for dogs that can be wirelessly contained?
How to Select the Best dog Containment System?
Selecting a dog-proofing system for your dog may be overwhelming, but it doesn’t have to be. The reputable wireless and underground fences listed in the above list reduce your options to the top choices the industry of pet care offers, and that means you’re already one step ahead when it comes to selecting an appropriate containment device.
What does the region cover?
The first thing to determine is what size space you’d like to make an area of safety for your pet. It could be anyplace within your home, but it is highly recommended that it be as far as is possible from busy streets or paths.
Select the Best Area
If you’ve got a backyard or front yard. You’ll need to decide on the ideal space for your pet to be able to enjoy.
The perfect areas shade the site and provide a place safe from predators if you live inland that is open and close to woods. Your dog is the best judge of, and you’ll need to determine the most suitable area to keep your dog in your yard is.
Waterproof Collar
When you have determined the amount of space you require. You’ll discover the right appropriate system of containment to meet your requirements.
The other thing to keep an eye on when selecting a dog-proofing system for your pet is whether it’s waterproof. If your property is surrounded by water sources like lakes or a pond, you’re likely to find that your dog is fond of swimming or splashing around.
The purpose of a containment system isn’t about punishing your dog but creating an area of protection that permits the dog to live there in the best way possible without exceeding the limit.
If your dog is fond of swimming in the water throughout the day, set the barrier close to an area they can easily access.
The wall will teach your dog to stay near the water source and lead them to remain within the boundaries of the space.
It is also possible to add water bowls around the area. But not putting out food for your dog is not advised as it may attract unwanted pets and even pests.